The Servo Control Mechanisms

 Servomechanism simply speaks of a system where a feedback or error correcting signal will help in the management of speed, mechanical positions, and other relevant parameters.

The steam engine regulator is the first known sort of servo motor. These controllers also found their applications in fire controllers to adjust the shooting angle and the air-fuel ratio during the Second World War. Today, servo control system is used in the field of IT hardware during the early developmental phases. You can also speed control motor price (which is also known as “speed control motor ราคา” in the Thai language) through online websites.

et0125ms.jpg (600×400)

Understanding the Mechanism of a Servo Motor

Typically, there exist two kinds of motors – DC Servo Motor and AC Servo Motor. The servo is basically a small device that consists of a shaft for the output. The angular position of the shaft can be regulated with the support of coded signals that are sent to the servo. This position of the shaft is preserved so long as the servo keeps receiving the signals. When the signal that is sent varies, the position of the shaft is also shifted.

The working mechanism of a servo is extremely simple. The control circuits that exist within the potentiometer and the servo are connected with the output device, called the shaft. It’s the potentiometer which assists in the regulation of the angle of the shaft with the aid of coded signals which are obtained and the control circuit.

Normally, this shaft is easily angled between 0 to 180 degrees and sometimes also has a wider range based on the design and manufacturer. The angular position of a shaft is restricted because of the placement of a stopper in the gear case.

Leave a Reply

Your email address will not be published. Required fields are marked *